Sunvivae 220W Bifacial Portable Solar Panel with 7-in-1 Adapter Cable & 2 Reinforced Kickstands
Sunvivae 220W Bifacial Portable Solar Panel with 7-in-1 Adapter Cable & 2 Reinforced Kickstands
220W Bifacial Portable Solar Panel
Bring more solar charging capacity to camping, RV travel and backup-power setups with a foldable bifacial panel, ETFE surface and broad power-station connectivity.
Direct sunlight in front. Reflected light behind.
The bifacial design collects direct sunlight on the front and can also use reflected light reaching the rear. The additional contribution varies with surface reflectivity, panel clearance, angle, weather and shading.
Bifacial energy gain is conditional and not guaranteed. Snow, sand and light-colored surfaces generally reflect more light than dark ground or grass.
220W output with high-efficiency cells
Premium monocrystalline cells provide conversion efficiency up to 23.5% under suitable test conditions, while the ETFE surface supports durability for repeated outdoor setup and transport.
Rated Solar Power
Suitable for compatible higher-capacity portable power stations and off-grid energy systems.
Cell Efficiency
High-efficiency monocrystalline cells convert more available sunlight into usable electrical power.
Additional Rear Capture
Rear-facing cells can contribute energy when useful reflected light reaches the back of the panel.
ETFE protection and a reinforced frame
The panel combines an ETFE surface, encapsulated monocrystalline cells, protective backing and a corrosion-resistant aluminum frame for a practical balance of efficiency, rigidity and portability.
- ETFE surface for weather and wear resistance
- Encapsulated monocrystalline solar cells
- Reinforced corners for transport protection
- Aluminum frame for structural stability
- Fabric-backed folding construction
IP68-rated solar-panel construction
The panel assembly uses water-resistant materials and protected connection hardware for outdoor charging in changing conditions.
Two reinforced kickstands, three angle options
Use the reinforced kickstands to select approximately 40°, 50° or 60° positioning. Adjust the panel as the sun moves and place it on stable ground.
- 40° low-angle position
- 50° middle position
- 60° higher-angle position
- Quick setup without separate mounting hardware
- Secure or fold away during strong wind
Multiple adapters for common solar inputs
The included adapter cable supports several commonly used connector formats. Connector fit alone does not guarantee electrical compatibility.
Check Voltage Range
Confirm that the complete solar operating and open-circuit voltage range is accepted by your power station.
Check Power & Current
Verify that the station's maximum solar wattage and current limits can accept the panel's output.
Check Plug & Polarity
Match the connector size and positive/negative polarity before making the connection.
Fold it into a carry-ready case
The folding design, integrated handle and built-in accessory pouch make the panel easier to move between storage, vehicle and campsite.
| Rated Power | 220W |
|---|---|
| Cell Design | Bifacial monocrystalline |
| Cell Efficiency | Up to 23.5% |
| Unfolded Size | 53.8 × 34.6 in / 137 × 88 cm |
| Folded Size | 34.6 × 26.7 × 1.3 in / 88 × 68 × 3.3 cm |
| Net Weight | 11 lb / 5 kg |
| Surface | ETFE |
| Panel Rating | IP68 |
| Kickstands | 2 reinforced kickstands |
| Adapter | 7-in-1 solar adapter cable |
Output changes with the conditions
Higher Output
Clear midday sunlight, clean cells, proper orientation and an unobstructed sky support stronger charging performance.
Lower Output
Cloud, shade, heat, poor angle, cable loss and the power station's input limit can reduce charging power.
Rear-Side Gain
Rear contribution depends on reflective ground, clearance behind the panel and the amount of light reaching the back.
Before you connect
Will the panel always produce 220W?
No. 220W is the rated output under standard test conditions. Real output varies with sunlight, temperature, angle, shade, surface reflection, cable losses and the receiving device's limits.
Is the bifacial gain guaranteed?
No. Rear-side gain depends on surface reflectivity, panel height, angle and environmental conditions. Dark surfaces and grass generally provide less reflected energy.
Does the connector guarantee power-station compatibility?
No. You must also confirm voltage range, maximum input current, accepted wattage and polarity for the exact power-station model.
Can I connect it directly to a battery?
Do not connect it directly to a bare battery. Use a compatible solar charge controller configured for the battery chemistry and system voltage.
Can it remain outdoors permanently?
This is a portable panel. Secure it in wind, keep connectors protected, dry it before folding and store it indoors when it is not being used.
What is included?
The supplied information confirms one 220W bifacial portable solar panel, one 7-in-1 adapter/extension cable and one user manual. Contact us before ordering if a specific connector must be confirmed.
Need a compatibility check?
Send us your power station's exact model and a photo of its solar-input label. We can help compare voltage, current, wattage, connector and polarity requirements.
Contact SunvivaeWhy Shop with Sunvivae?
Secure payment options, clear policies and responsive support—before and after your purchase.
Secure Checkout
Use the secure payment options shown at checkout.
Trackable Shipping
Tracking details are provided after your order ships.
12-Month Warranty
Limited warranty coverage for added peace of mind.
Helpful Support
Contact us with product, order or compatibility questions.
How to Pay
Add your item to the cart and continue to checkout. Available payment methods will be displayed securely for your order.
Shipping & Order Tracking
Returns & Refunds
Secure Payment
Visit our Contact Us page or email support@sunvivae.com.