Sunvivae 110W Bifacial Portable Solar Panel with Adjustable Kickstands & Multi-Connector Cable
Sunvivae 110W Bifacial Portable Solar Panel with Adjustable Kickstands & Multi-Connector Cable
110W Bifacial Portable Solar Panel
Capture direct sunlight from the front and usable reflected light from the rear—then fold the panel into a compact carry case for camping, RV travel and emergency power.
Front-facing sun. Rear-side reflected light.
The bifacial cell design can use direct sunlight on the front and reflected light reaching the rear. Results vary with the ground surface, panel height, angle, weather and shading; bright surfaces such as snow, pale roofs and light-colored ground generally reflect more useful light.
Any rear-side energy gain is conditional and is not guaranteed. Rated output is measured under laboratory test conditions; real-world output is normally lower.
Efficient, durable and easy to position
Portable Solar Input
Designed to recharge compatible portable power stations during travel, outdoor stays and backup-power preparation.
Monocrystalline Cells
Premium monocrystalline cells deliver conversion efficiency up to 23.5% under suitable test conditions.
Adjustable Setup
Reinforced kickstands support approximately 40°, 50° and 60° positioning to help face the panel toward the sun.
Two reinforced kickstands
Set up the panel on a stable, level surface and select the available kickstand position that best faces the sun. Reposition it as the sun moves to improve energy collection.
- Approximately 40°, 50° and 60° positions
- Reinforced metal kickstand structure
- Quick folding design for packing and storage
- Always secure or fold away the panel in strong wind
Portable enough for your next trip
The built-in handle and folding format make the panel easier to carry between your vehicle, campsite and storage space.
| Rated Power | 110W |
|---|---|
| Folded Size | 24 × 23.6 × 1.3 in |
| Unfolded Size | 48.2 × 23.6 × 0.6 in |
| Net Weight | 7.7 lb / 3.5 kg |
| Cell Type | Monocrystalline, bifacial |
| Surface | ETFE coating |
| Panel Protection Rating | IP68 |
ETFE protection and a rigid frame
The ETFE surface helps resist moisture, dust and everyday outdoor wear, while the corrosion-resistant aluminum frame and reinforced corners add structure during transport and setup.
Connect to a compatible power station
The included multi-connector cable supports several commonly used solar-input formats, but connector fit alone does not guarantee electrical compatibility.
Check Input Voltage
Your power station must accept the panel's 20V-class solar input and its complete allowed input-voltage range.
Check Power & Current
Confirm the station's maximum solar wattage and input-current limit can safely accept the panel.
Check Plug & Polarity
Verify connector dimensions and positive/negative polarity before connecting—especially with barrel adapters.
Solar output changes throughout the day
Best Conditions
Clear midday sunlight, correct orientation, clean cells and an unobstructed view of the sky support higher output.
Reduced Conditions
Cloud, shade, high panel temperature, poor angle and cable losses reduce available charging power.
Bifacial Gain
Rear-side contribution depends on surface reflectivity and clearance behind the panel. Grass usually reflects less than snow or pale surfaces.
Unfold, position, connect and charge
Choose an open location with direct sunlight, set both kickstands securely and verify all electrical requirements before connecting your power station.
Before you connect
Does a 110W panel always produce 110W?
No. 110W is the rated output under standard test conditions. Actual power varies with sunlight intensity, temperature, angle, shading, reflection, cable loss and the receiving device's input limits.
Will the rear side add 10%–30% more energy?
That range is possible only under favorable reflective conditions. It is not guaranteed. Dark ground, grass, shade and limited rear clearance can produce a much smaller gain.
Can I connect it directly to a battery?
Do not connect the panel directly to a bare battery. Use a compatible solar charge controller configured for the battery chemistry and system voltage.
Is every EcoFlow, Jackery, BLUETTI or Anker model compatible?
No. Models use different voltage, current, wattage, connector and polarity requirements. Check the exact power-station input specification before purchase.
Can I leave it outside permanently?
This is a portable panel. Dry it before folding, protect plugs and connection points, secure it during wind and store it indoors when it is not being used.
What is included?
The supplied information confirms one 110W bifacial portable solar panel, one solar extension cable with a multi-connector adapter set, and one user manual. Contact us before ordering if you require confirmation of a specific plug.
Not sure whether your power station is compatible?
Send us its exact model and a photo of the solar-input label. We will help you compare voltage, current, wattage, connector and polarity requirements.
Contact SunvivaeWhy Shop with Sunvivae?
Secure payment options, clear policies and responsive support—before and after your purchase.
Secure Checkout
Use the secure payment options shown at checkout.
Trackable Shipping
Tracking details are provided after your order ships.
12-Month Warranty
Limited warranty coverage for added peace of mind.
Helpful Support
Contact us with product, order or compatibility questions.
How to Pay
Add your item to the cart and continue to checkout. Available payment methods will be displayed securely for your order.
Shipping & Order Tracking
Returns & Refunds
Secure Payment
Visit our Contact Us page or email support@sunvivae.com.